I am in a frenzy to redo and flip a lot of my garage stuff because a friend would like to see about taking it on consignment. Her stuff is more vintage and shabby chic than mine, but she is willing to entertain the idea of my eclectic style. Here’s hoping!
Two weeks ago, I found an old night table at the thrift store. It was only $10, but it was solid wood. I looked it over and figured the dents and scratches would stand out if I went in a shabby direction, so I snagged it.
See the dings and dents? I didn’t worry too much over them, since I was going to distress the piece after I painted it. I did three coats of Annie Sloan’s Duck Egg and then distressed it with sandpaper. I sealed it in dark wax, and then went back and removed the extra dark wax with clear wax.
You can enlarge the photo so you can see the distressing. I also painted the inside of the drawer in Old White. It came out so pretty. I love the color for bed and bath, and I think this is a nice piece for either room. I can even see it in a living area, with a comfy reading chair and a bunch of books inside.
Thanks for stopping by 🙂
And I mean that in the coolest way possible.
A few weeks ago, I was driving through the neighborhood next to mine when my eye was caught by a stubby leg sticking out of a trash heap. It was a plant stand. I snagged it, thinking to use the spindles for some other project. Upon inspection, it only needed a few new screws and some wood filler to make it sturdy again.
I love the spindles. They give it such character. I was tempted to use a simple whitewash and distress it, but decided to use chalk paint in a light turquoise color, because I want it to stand out. I have to admit, most of the pieces I flip I redo as statement pieces (the red and gold accent table comes to mind), because they are small. If this had been a shelf unit of a dresser, I would have whitewashed and distressed to make it blend into the background.
A few weeks ago I was picking up some chalk paint at a lovely antique place, when my wandering magpie eyes were caught by a lovely iron gate fragment.
It had a lovely patina, but it was very rusty and the green paint all flaky and chippy. It was a lovely piece to hang on a wall, but mindful of lead paint, I had to try and sand it as much as I could before cleaning and sealing it.
This is where the comedy of errors began.
Try saying that really fast!
Not long ago, I got a call from the local thrift store (AKA my “dealer”) about a vintage telephone table he received. I hightailed it over there and turned out he had two of them. As much as I want all the thrift things, I picked the more stable of the two to redo. I had seen several telephone tables flipped on my fave TV show, so I was a bit familiar with the process.
Forgive the mess, but it’s my garage and the only place for me to work. The table had a piece of wood veneer that curved around both table tops to conceal any telephone books placed on the lower section.
But I hated it and took it off. I used some wood filler, then sanded, and sanded, and sanded some more, cleaned it up, and primed it.
Y’all know by now I am a fan of upcycling and thrift stores and basically picking up trash and trying to make it into treasure. It keeps me happy and doesn’t cost a lot of money, so everyone wins all around.
I have been struggling with my fireplace for about….oh…. seven years? The brick is a rather blah tan color, and the mantel is a bleh builder’s grade cream gloss. I have been trying to convince Hubby to let me paint the brick and mantel, and may just be able to do it before the holidays. Maybe. Jury is still out. But until then, I think I’m satisfied enough with it.
I have never understood the different pronunciations for the word “vase”. My dad told me once that it depended on the vase’s value. That may be fake, but it’s accurate! Anyway, I remember seeing this simple tutorial from Two Twenty One for a painted vase, and dug around my stash of thrift store glassware for some small vases I remembered snagging for a nickle a piece. I found my gold spray paint, newspaper, and paint tape and got to work.
First, you need to clean your vase thoroughly, and then wipe down with alcohol (isopropyl, not bourbon). Next, take a strip of painter’s tape and adhere around the vase, making sure to keep it even and seal the edge that will be against the paint. Now take another strip of tape, and tape the newspaper around the vase right on the first strip, careful not to cover the bottom edge of the first strip. Tuck the paper into the vase to make sure you don’t spray paint in it. Careful do a second wiping of the exposed glass, let it dry, and then spray in short even bursts. One coat is usually enough, but two will even out the coverage. After drying, remove the tape strips and VOILÁ!!!
How cute are they?? I just love how they turned out, and like grouping them together. I have no idea what I’m going to do with them, but I can see placing a pretty bloom in each one and clustering them on a dresser or a vanity. I also took the opportunity to paint two “Pro-Flowers” vases I had collecting dust in the garage. I plan on using them to flank a future project for the fireplace area.
All I did was clean out the inside of each vase and wipe down with alcohol, then sprayed Looking Glass spray paint from Krylon™ on the inside. Unlike the gold paint, the looking glass paint needs several coats to cover well, and you have to do short, light bursts. Otherwise the paint will streak and run. These took five coats each to finish. If my tutorial is a little confusing, hit the link above and Chelsea will walk you through it. Check out her blog for other DIYs, too.
Thanks for stopping by!! 🙂
I’s still making lots of velvet flowers and still have no place to put them. I have enough to fill a foam wreath, and I may do that, too. But while perusing Pintercrack, I found the coolest floral centerpiece on Weddingomania:
And it brought to mind some silver-plated goblets that my parents gave me when they were downsizing. None of my sisters wanted them, and I really didn’t want them to end up in a garage sale. But they are not safe for wine, which in my opinion detracts from ownership. Anyway, who says they have to be for drinking anything, right??
Because you can never have enough felt flowers. Trust me on this.
I ❤ Pinterest. I get a lot of ideas from that site. Sometimes though, I find that an idea or “craft” featured has no tutorial available. It’s rare, but it happens. I have this jones for making felt flowers, and I found one felt flower on a board that looked soooo pretty and easy to do. But alas, it has no tutorial. Time to make my own.
What you’ll need:
- One sheet of felt cut into circles of varying sizes (thirteen large, twelve smaller)
- Hot glue
- Button or earring for center
I have noticed a trend on design sites lately. Gold is making a comeback, and a big one at that. Last year it was mercury glass, and this year is soft, glowing GOLD! I have a stash of wine and liquor bottles in the garage that I have been saving to decorate with my brother’s girlfriend, who is a crafting wizard. No, I don’t need an intervention. I have been saving the bottles for a couple of years, people.
Stop judging me!
Anyway, I decided that while my Aggies were being massacred by Alabama’s Crimson Tide, I would do some crafting instead of crying. So I got some of the more interesting shaped bottles and some old vases that didn’t go with anything, and grabbed spray paint, ribbon, burlap, flowers, and hot glue gun and got to work.
What you’ll need:
- Random bottles, vases, or containers.
- Spray paint in your choice or color(s).
- Rubbing alcohol.
- Embellishments of your choice, like ribbon, fabric, twine, burlap, flowers, etc.
- Hot glue gun, or whichever kind of glue you prefer.
This past weekend, I attended a surprise birthday party for a friend. Her husband (also a friend) had asked several people for help in coordinating an 80’s party, and he bought some rather cool centerpieces made from cassette tapes.
You read that correctly. CASSETTES!!
So, let’s dust off this blog and get started.
What you’ll need:
- Hot glue gun
- Glue sticks
- Eight cassettes
- Non-stick surface (just in case)